Manufacturing process / Bamboo Center Group is a company which manufacturing house materials by using Bamboo powder with Polyethylene in Thailand. Then we export around the world.

A1 1 Basically, plywood boards are usually used for roofing, exterior walls, interior plywood, flooring materials, and where wallpaper is pasted, but our materials can be used instead.

A2 Yes. It is possible. However, the existing outer wall will not be dismantled. If dismantled, the demolition cost of over 1 million yen and construction material waste will be generated. In order to reinforce it on the outer wall, it is necessary to manufacture parts with our materials on the outer wall material, measuring the correct dimensions according to the customer's home. Regarding the interior, depending on what you want to renovate, we will remove the existing plywood and replace it with our materials.

A3 Physically changeable. Recently, plaster walls and earthen walls are rarely used. However, old houses used plaster and clay walls to create a well-ventilated house. However, Japan is an earthquake-prone country, and based on past major earthquakes, tens of thousands of houses have collapsed. We recommend refurbishment even in the sense of saving lives.

A4 Yes. We have roofing materials similar to tiles. However, it is lighter than tiles and is different from the weight of Japanese roof tiles. In Japan, tile roofs were common until the 1990s. This is to prevent the tiles from falling off because the material cost is cheap and the roof is light.
However, although it has become possible to prevent collapse by reducing the weight, the durability is inferior to roof tiles. If it is a tile, it can be used normally for about 50 years, and even if it breaks, only the broken part can be repaired. If you have a slate roof, you have to replace the entire roof. Slate roofs have a lifespan of 30 to 40 years.

A5 Our materials are different from the building materials that ordinary carpenters use. Designs and colors can also be selected only from the colors specified from the sample photos here. The big difference is the following.
We use a special inset manufacturing method that does not use screws or nails. Therefore, since it is not a normal building material, it can be constructed in a short period of time. You can shorten the work period of the carpenter and reduce the overall construction cost.

A6 We conduct quality inspections at our Thailand factory. However, we do not disclose these certificates to all individual customers. We only disclose information to our partner companies who place orders through business alliance transactions, and the building contractor will guarantee the renovation from there, so please talk to the building contractor about the security of your home. increase.

A7 First of all, the architect will check the condition of the customer's house and select the renovation part. Therefore, we measure and manufacture different products for each individual case, so it is not always possible to use existing materials. We would like to ask you to wait at least one month and a half to produce and ship in Thailand.

A8 it is possible. However, basically there are contractors and partner companies in business alliances in metropolitan areas and their suburbs.
In very remote areas and rural areas, existing business partners and vendors may not be able to respond.
In that case, please find the nearest contractor by yourself and consult with the architect. That way, even if you live in a remote area, we can still serve you サイトマップ SITE